Primer/Sealer

Primers and Sealers
Sort By:  
4:1 High Build Primer (2253)
Multipurpose primer offering the functionality of ‘3 products in 1’. Mix 4:1 for a primer filler, 4:1:1 for a primer surfacer or 4:1:2 for a primer sealer. Substrates: Bare metal, properly prepared aluminum and galvanized, GRP, SMC, fiberglass, polyester filler, OEM surfaces *Requires an acid etch primer, like ACID#8™
2253
$85.50
LOW VOC 1K PRIMER (2283)
High build, fast drying, acrylic primer with excellent adhesion to many surfaces. It is designed to fill surface scratched or similarly defective metal, stone chip damage, polyester bodyfiller, fiberglass and most factory finish or refinish paint systems (except air dried synthetics). UP2283 easily sands to a feathered finish and can be used as a primer under 1K acrylic, 2K acrylic and synthetic topcoats.
$59.09
ACID#8 ACID ETCH PRIMER - NATIONAL RULE (776)
1K ready to spray phosphoric acid ester formula promotes paint adhesion to difficult substrates, like galvanized steel and aluminum. Ideal for rub throughs in primer prior to application of color and on new bare metal panels. Substrates: Bare metal, aluminum and galvanized, GRP, SMC, fiberglass, polyester filler, OEM surfaces
$33.31
4:1 RAPID SYSTEM PRIMER (6303)
Rapid System Primer with unique new Rapid Cure Technology cures in a fraction of the time versus conventional primers. Ready to sand in less than 1 hour, it’s easy to use and features excellent hiding capabilities for a high quality uniform foundation prior to color coating. Fast air dry finish saves time and energy costs Excellent coverage and easy sanding Only one hardener required for all climates and conditions, reducing your stock investment
$125.00
Copper Weld-thru Primer (91001)
A high adhesion, super conductive, fast drying primer offering excellent corrosion protection when applied to panels prior to welding. High concentration of copper in film
weld-thru primer - copper
$20.00
Acid Etch Primer (91010)
Acid Etching primer
$20.00
RAPTOR 4:1 ANTI-CORROSIVE EPOXY PRIMER KIT (4830)
RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating. It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust
  • Can be applied wet on wet
  • 1L covers approximately 60 sq feet at 3 MIL
  • Salt spray resistance test completed at >1000 hours according to ASTM B117 at an independent laboratory
$175.00
Per Page      1 - 7 of 7
  • 1